BROAD FUNCTIONS:

• Ensure smooth process transfer from GO R&D to Penang
• Capacity Enterprise CE / HAMR program development in Penang
• Manufacturing Yield / Defects Improvement projects
• Product improvement iteration qualification

Regular

• Ensure timely translation of new HAMR product/process transfer from US R&D to Penang. Closely work with counterpart in R&D to develop new process / materials for performance improvements.
• Continuous Improvement of Sputter yields / productivity / high PPH for product maturity. Establish all necessary unique process controls for large volume builds based on the learning at NPI stage & HDD requirements.
• Conduct partition studies for troubleshooting root cause of high particle / low yield. Work together with the team members to take appropriate corrective actions for improvements including but not limited to implementing target sandblast criterias, process optimizations, working with target suppliers on quality improvements etc
• Work with Test yield team on Failure Analysis, understanding of various defect mechanisms of HAMR media and their relationship with sputter process / materials etc.
• Optimize sputter machine start-up & operation procedures to ensure process consistency & repeatability. Work with the team on machine start-up time reduction before media characterization activities in order to reduce downtime & improve productivity.
• Work together with Sputter Equipment team on hardware improvement projects for downtime reduction & yield improvements. Ex- sputter magpacks, different type of cathodes, disk holder designs etc.   

Irregular

• Support inter-department projects (Back End, TEST)
• Support HDD return failure analysis

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide post-production and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

Who You'll Work With

We are looking for a self-motivated, and team-oriented Manufacturing Engineer - Debug Focus who takes pride in driving and sustaining product development through manufacturing. As an Arista Software Manufacturing Engineer - Debug Focus, you will engage with Engineering, Platform Design, CM Partners, CA personnel and other business functions. You will get an opportunity to be part of a fast-paced, high caliber team building test software to help validate high-speed digital designs and achieve high yields in manufacturing Arista Network products used in the computer networking industry's largest data centers and AI based applications.

What You'll Do

• Manage and drive quality metrics and improvement activities (yields, bone pile, scrap rates, component fallout).
• Line stops / purges / quality issues leadership.
• Drive product failure debug activities to minimize scrap rate.
• Actively debug product failures.
• Assess manufacturing personnel technical capability.
• Ensure that production site receives the required level of product training.
• Provide hardware debug mentorship to contract manufacturing test engineers and debug technicians. Improve manufacturing operations test processes and actively enhance efficiency, consistency, cost avoidance, and customer satisfaction.
• Address Return Rate (RMA) and customer complaints.
• DRT participation and leadership. Actively work with the Defect Reduction Team to identify product issues and drive resolutions.
• Manage and drive test yield improvements.
• Establish technical direction through the investigation and evaluation of new test technologies.
• Interface/engage with Engineering, Platform Engineering, Manufacturing and CM partners.
• Understand implementation of Change Orders (Agile)
• Manage test infrastructure requirements and ensure factory capacity capability.
• Factory readiness for New Product launches
• Identify and drive process improvement, cycle times reduction and lean activities
• Develop process and/or best practice documentation.
• Establish technical direction through the investigation and evaluation of new test technologies.
• Work in conformance to established manufacturing test processes and procedures.

BROAD  FUNCTIONS : 

• Coordinate on DET testing and publish results accordingly.
• Ensure all data are uploaded to OLSPC in timely manner
• Guzik tester capacity and resources planning.
• Data analysis
• Competitor analysis and FA.

RESPONSIBILITIES : 

Regular

• Work with Sputter Process and coordinate with technicians on DET testing activities and priorities.
• Monitor DET results closely and advise sputter process for tuning accordingly whenever necessary.
• Resources and tester capacity planning in supporting all DET testing activities.
• Involve in drive build and internal component data analysis and provide valuable opinion to improve internal product performance.
• Propose DET specification to Product & Sputter group based on process capabilities for specs revision during mass production.
• Supervise and coach a group of technicians to perform routine tasks.
• Support all DET testing for internal process evaluation.
• Understand and accept responsibility for performing jobs safely
• Follow safety and health rules and regulations
• DET lab 7S

Irregular

• Reference generation and head screening for new program.
• Failure analysis for magnetic related issue.
• Product to product comparison.

CONTACTS

Regular

• Sputter Process Engineering, R&D Sputter, PE and QA

 Irregular

• FA, Operation

Electronics
• Understanding of existing platforms, evaluate and select electronics platform for use in power tool applications from a wide variety of technical disciplines.
• Independently develop hardware specification document on the functional requirements of a product.
• Improve existing hardware design based on technical requirements.
• Develop/ improve technical solutions in cooperation with the project team members independently.
• Independently develop and maintain circuit design for different product.
• Independently create and maintain technical documentation.
• Independently perform functional test of test-unit.
• Independently validate and do essential improvements to the electronics to pass Bosch internal qualification.
• Independently prepare essential technical documents for electronics/ tool certification.
• Follow the project schedule according product development process.
• Support line and warranty teams for electronic device changes and updates.
• Ensure all documents are up-to-date based on engineering change (EC) requests.
• Apply all processes according to valid PT and Bosch procedures published in BGN.
• Apply a manufacturing mind set to designs in order to effectively and efficiently mass produce products while using expertise to elevate the entire team.
• Support and take over special tasks on section and department level as assigned by the superior.

Motor
• Independently assist / improve technical solutions in cooperation with the project team members.
• Independently assist/ improve with development of designs and processes to improve efficiencies, reduce costs, and improve quality according to project objectives.
• Collaboration of counterpart and provide cost estimates during in development projects.
• Understanding of existing motor platforms, evaluate and select motor platform for use in power tool applications from a wide variety of technical disciplines.
• Independently create and maintain technical documentation.
• Follow the project schedule according product development process.
• Support line and warranty teams for motor device changes and updates.
• Ensure all documents are up-to-date based on engineering change (EC) requests.
• Apply all processes according to valid PT and Bosch procedures published in BGN.
• Apply a manufacturing mind set to designs in order to effectively and efficiently mass produce products while using expertise to elevate the entire team.
• Support and take over special tasks on section and department level as assigned by the superior.

• Responsible to ensure smooth running of Bosch Production System (BPS) activities to be in line with company goals and objectives at the Value Stream area, which covers coordination, planning, implementation, effectiveness and aligned with plant BPS Vision, Mission direction and BPS Road Map deployment.
• Responsible for production line layout as per PGL concept and improvement of the line productivity and working towards improving utilization rate of the machines.
• To ensure correct application of all relevant company guidelines for production and output determination according to PGL/BPS/Lean Concepts
• Able to support workshops for Value Stream Planning (VSP)/System CIP Projects and regular/annual BPS assessment of the maturity level.
• To be responsible for production line layout and improvement of the line productivity of the employees and utilization rate of the machines.
• To be responsible for Root cause analysis and Problem solving in close cooperation with production and manufacturing teams.
• To initiate technical, organizational and changeover improvements and implement them with production associated with an improvement plan.
• To be responsible for Lean manufacturing activities incl. leading continuous improvement projects, moderate/support workshops.
• To execute any other related duties assigned by immediate supervisor from time to time with compliance related company, central and legal requirements.

Job Overview

Setup of local SO-LCL-team as key pillar in enabling more efficient future growth for SO as well as increased independence from market for (SC) talents in Rt. Goal responsibility for these positions will be with ME/PRM1-SO.

• Generate templates and reports with data analysis tools (e.g. DAST/Spotfire/Tableau)
• Test data analysis using IT tools and statical methods
• Generate KPI reports and track KPIs
• Perform test data analysis with IT tools and statistical methods to benchmark test sites or investigate performance of new manufacturing sites.
• Coordinate Bosch internal change management, generate and track engineering change requests for semiconductor products
• Set up of product master data for new products within our international production network
• Support go-life of our global product data base
• Key user for data analysis and traceability tools (e.g. DAST/E2OPEN)
• Requalification of automotive ASICs
• Candidate is responsible for automotive IC's (integrated circuits) in our international production network
• Candidate is responsible to manage product data in series production and coordinate product issues at multiple manufacturing locations around the globe.
• The monitoring of quality and costs of the products is under the candidate's responsibility.
• Planning, controlling and supervising product data projects is also part of candidate's responsibility
• The candidate is required to coordinate manufacturing data of IC products in an international production network in cooperation with the development and manufacturing departments

The position aims to play a crucial role in driving sales growth and ensuring effective sales operations within the organization by supporting and collaborates with other departments to achieve sales targets, maintain strong customer relationships, and contribute to the overall success of the company.

Business Development

• Participate in development of business, sales planning, and growth strategies and develop Sales Proposal with sales pipeline to meet budget

• Develop and maintain a pipeline of potential customers by attending networking activities, conduct marketing activities, customer meetings, proposal development and customer presentations to deliver outstanding customer value

• Maintain awareness of competitor information and participate in industry association in accordance with company policy

• Collaborate with internal teams (engineering, product management) to develop proposals and present solutions that meet client needs.

• Ensure business sustainability via balancing of sales, profitability and collection.

Relationship Management & Account Management

• Develop and manage relationships with key accounts in the industrial automation industry.

• Maintain a deep understanding of customer needs/issues and ensure their satisfaction with solutions provided.

• Regularly engage with clients to assess their requirements and identify upselling or cross-selling opportunities.

• Manage and coordinate with key vendors and partners to gain competitive advantage through creation and development of customer in selected vertical markets.

Sales support

• Collaborate and work closely with Application Engineers to ensure smooth project development & implementation which may include risk assessment and provision of technical solutions to meet customers’ needs

• Manage the sales process to ensure customer requirements are properly qualified prior to investment of resources

• Diploma/degree in Engineering discipline (Mechatronics/Electrical)

• Knowledgeable in Windows applications (Word, Excel, Power Point)

• At least 3-years’ experience in Sales function

• Strong knowledge of automation solutions and their applications

• Excellent Interpersonal and Communication skills

• Experience in distribution sales or a related field is a plus.

• Knowledge of the industry and market trends

Key Responsibilities:

• Firmware Debugging & Failure Analysis: Develop, debug, and analyze embedded firmware, with a primary focus on diagnosing system failures.
• Testers Design & Development: Collaborate in the design and development of in-house testing tools and equipment to ensure product integrity and reliability.
• Hardware Integration: Work closely with hardware teams to design tester platforms based on test point.
• Software Development: Develop and maintain software applications for interfacing with testers and hardware devices.
• Troubleshooting & Issue Resolution: Identify and resolve complex issues across firmware, software, and hardware systems.
• Documentation: Create and maintain technical documentation, including design specs, test procedures, and failure reports.
• Collaboration: Work closely with cross-functional teams including product design, QA, hardware, and manufacturing teams.
• Responsible for NPI engineering from design stage to high volume manufacturing.